All Dissolution Sampling Cannula

Dissolution sampling cannula to enable sampling from dissolution vessels. Dissolution sampling cannula for every make of dissolution tester.

1/8″ (3.2mm) Cannula with Heat Shrink Tubing, set screw style, Stopper for V-Series

1/8″ (3.2mm) Cannula with Heat Shrink Tubing, set screw style, Stopper for V-Series

Part No: CAVSTP-VK
Manufacturer: Agilent
1/8″ (3.2mm) PEEK Auto-Mag Auto-Probes, 6-Sample or 8-Sample for Hanson Vision

1/8″ (3.2mm) PEEK Auto-Mag Auto-Probes, 6-Sample or 8-Sample for Hanson Vision

Part No: 6THD90-HR
Manufacturer: Hanson
1/8″ (3.2mm) PEEK Probe, Auto, 1000mL & Small Volume for Hanson Vision

1/8″ (3.2mm) PEEK Probe, Auto, 1000mL & Small Volume for Hanson Vision

Part No: 74-105-307
Manufacturer: Hanson
1″ (25.4mm) Gauge Block to set stopper height for Sotax 500/900mL Cannula (Use with PRBFS10-ST or PRBFS10-ST82)

1″ (25.4mm) Gauge Block to set stopper height for Sotax 500/900mL Cannula (Use with PRBFS10-ST or PRBFS10-ST82)

Part No: 010-06-202
Manufacturer: Sotax
1000mL DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for Distek Baths

1000mL DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for Distek Baths

Part No: CAN01K-DV
Manufacturer: Distek
1000mL Solid Housing Sampling Probe for Distek Baths

1000mL Solid Housing Sampling Probe for Distek Baths

Part No: CAN01K-DSH
1000mL Standard Sampling Probe for Distek Baths

1000mL Standard Sampling Probe for Distek Baths

Part No: CAN01K-DK
Manufacturer: Distek
12″ (305mm) Bent PEEK 1/8″ (3.2mm) Cannula with PEEK Luer Lock

12″ (305mm) Bent PEEK 1/8″ (3.2mm) Cannula with PEEK Luer Lock

Part No: CAN012-PV
Manufacturer: Generic
13″ (330mm) Bent 316 SS Cannula with SS Luer Lock (thru head mount) for Sotax

13″ (330mm) Bent 316 SS Cannula with SS Luer Lock (thru head mount) for Sotax

Part No: CAN013-ST
Manufacturer: Sotax
13″ (330mm) Bent 316 SS Cannula with SS Luer Lock and 2 Position Stopper at 500mL and 900mL for Sotax

13″ (330mm) Bent 316 SS Cannula with SS Luer Lock and 2 Position Stopper at 500mL and 900mL for Sotax

Part No: CAN013-ST-5-9
Manufacturer: Sotax
13″ (330mm) Bent 316 SS Cannula with SS Luer Lock, Pre-set with stopper at 500mL for Sotax

13″ (330mm) Bent 316 SS Cannula with SS Luer Lock, Pre-set with stopper at 500mL for Sotax

Part No: CAN013-ST-5
Manufacturer: Sotax
13″ (330mm) Bent 316 SS Cannula with SS Luer Lock, Pre-set with stopper at 900mL for Sotax

13″ (330mm) Bent 316 SS Cannula with SS Luer Lock, Pre-set with stopper at 900mL for Sotax

Part No: CAN013-ST-9
Manufacturer: Sotax
15’’ (380mm) Bent 316 SS Cannula with SS Luer Lock & Tygon Tubing for QLA “01” style filters

15’’ (380mm) Bent 316 SS Cannula with SS Luer Lock & Tygon Tubing for QLA “01” style filters

Part No: CAN015-01
Manufacturer: Universal
15’’ (380mm) Bent 316 SS Cannula with SS Luer Lock & Tygon Tubing for QLA “01” style filters (CAN015-01)

15’’ (380mm) Bent 316 SS Cannula with SS Luer Lock & Tygon Tubing for QLA “01” style filters (CAN015-01)

Part No: CAN17-3317
Manufacturer: Universal
15″ (380mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock

15″ (380mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock

Part No: CAN015-SH
Manufacturer: Hanson
15″ (380mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock & PTFE sleeve for full flow/QLA “01” style filters

15″ (380mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock & PTFE sleeve for full flow/QLA “01” style filters

Part No: CA8015-VK
Manufacturer: Generic
15″ (380mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock for Erweka

15″ (380mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock for Erweka

Part No: CAN015-EWSS
Manufacturer: ERWEKA
15″ (380mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock for Erweka

15″ (380mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock for Erweka

Part No: CAN015-EW
Manufacturer: Erweka
15″ (380mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock, Pre-set with stopper at 900mL for Sotax

15″ (380mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock, Pre-set with stopper at 900mL for Sotax

Part No: CAN015-ST-9
Manufacturer: Sotax
15″ (380mm) Bent PEEK 1/8″ (3.2mm) OD Cannula with PEEK Luer Lock

15″ (380mm) Bent PEEK 1/8″ (3.2mm) OD Cannula with PEEK Luer Lock

Part No: CAN015-PH
Manufacturer: Erweka & Hanson
15″ (380mm) Bent PEEK 1/8″ (3.2mm) OD Cannula with PEEK Luer Lock & PTFE sleeve for full flow/QLA “01” style filters

15″ (380mm) Bent PEEK 1/8″ (3.2mm) OD Cannula with PEEK Luer Lock & PTFE sleeve for full flow/QLA “01” style filters

Part No: CA8015-PV
15″ (380mm) Straight 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock

15″ (380mm) Straight 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock

Part No: CANS15-SH
Manufacturer: Generic
15″ (380mm) Straight PEEK 1/8″ (3.2mm) OD Cannula with PEEK Luer Lock

15″ (380mm) Straight PEEK 1/8″ (3.2mm) OD Cannula with PEEK Luer Lock

Part No: CANS15-PH
Manufacturer: Generic
2.5’’ (65mm) Agilent/VanKel Auto-Sampling Return Cannula

2.5’’ (65mm) Agilent/VanKel Auto-Sampling Return Cannula

Part No: CANRET-25
Manufacturer: Agilent
2000mL DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for Distek Baths

2000mL DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for Distek Baths

Part No: CAN02K-DV
Manufacturer: Distek
2000mL Standard Sampling Probe for Distek Baths

2000mL Standard Sampling Probe for Distek Baths

Part No: CAN02K-DK
Manufacturer: Distek
4.5’’ (115mm) Agilent/VanKel Auto-Sampling Cannula for 900mL Sampling

4.5’’ (115mm) Agilent/VanKel Auto-Sampling Cannula for 900mL Sampling

Part No: CAN900-45
Manufacturer: Agilent
4.75’’ (120mm) Bent 316 SS Cannula with Kynar Luer Lock & Tygon Tubing for full flow/ QLA “01” style filters, Low Cost alternative

4.75’’ (120mm) Bent 316 SS Cannula with Kynar Luer Lock & Tygon Tubing for full flow/ QLA “01” style filters, Low Cost alternative

Part No: CAN475-01L
Manufacturer: Generic
4.75’’ (120mm) Bent 316 SS Cannula with SS Luer Lock & Perm SS Tip for full flow/QLA “01” style filters

4.75’’ (120mm) Bent 316 SS Cannula with SS Luer Lock & Perm SS Tip for full flow/QLA “01” style filters

Part No: CAN475-VK
Manufacturer: Generic
4.75’’ (120mm) Bent 316 SS Cannula with SS Luer Lock & Perm SS Tip for Hanson/QLA “HR” style filters

4.75’’ (120mm) Bent 316 SS Cannula with SS Luer Lock & Perm SS Tip for Hanson/QLA “HR” style filters

Part No: CAN475-HR
Manufacturer: Hanson
4.75’’ (120mm) Bent 316 SS Cannula with SS Luer Lock & Tygon Tubing for full flow/ QLA “01” style filters

4.75’’ (120mm) Bent 316 SS Cannula with SS Luer Lock & Tygon Tubing for full flow/ QLA “01” style filters

Part No: CAN475-01
Manufacturer: Agilent
4.75″ (120mm) Bent 316 SS 1/16″ (1.6mm) OD Cannula with Kynar Luer Lock, Low Cost alternative

4.75″ (120mm) Bent 316 SS 1/16″ (1.6mm) OD Cannula with Kynar Luer Lock, Low Cost alternative

Part No: CAN475-062L
Manufacturer: Generic
4.75″ (120mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with Kynar Luer Lock, Low Cost alternative

4.75″ (120mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with Kynar Luer Lock, Low Cost alternative

Part No: CAN475-SHL
Manufacturer: Generic
4.75″ (120mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS luer Lock

4.75″ (120mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS luer Lock

Part No: CAN475-SH
Manufacturer: Caleva / ERWEKA / Hanson / Pharmatest
4.75″ (120mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock & PTFE sleeve for full flow/QLA “01” style filters

4.75″ (120mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock & PTFE sleeve for full flow/QLA “01” style filters

Part No: CA8475-VK
Manufacturer: Generic
4.75″ (120mm) Bent PEEK 1/8″ (3.2mm) OD Cannula with PEEK Luer Lock

4.75″ (120mm) Bent PEEK 1/8″ (3.2mm) OD Cannula with PEEK Luer Lock

Part No: CAN475-PH
Manufacturer: Caleva & Hanson
4.75″ (120mm) Bent PEEK 1/8″ (3.2mm) OD Cannula with PEEK Luer Lock & PTFE sleeve for full flow/QLA “01” style filters

4.75″ (120mm) Bent PEEK 1/8″ (3.2mm) OD Cannula with PEEK Luer Lock & PTFE sleeve for full flow/QLA “01” style filters

Part No: CA8475-PV
Manufacturer: Generic
4.75″ (120mm) Straight 316 SS 1/8″ (3.2mm) OD with SS Luer Lock & PTFE sleeve for full flow/QLA “01” style filters

4.75″ (120mm) Straight 316 SS 1/8″ (3.2mm) OD with SS Luer Lock & PTFE sleeve for full flow/QLA “01” style filters

Part No: CA8475-VKS
Manufacturer: Generic
500/900mL 316 SS Cannula with Inline Filter Housing (.082″ tubing) for Sotax AT/AT7smart

500/900mL 316 SS Cannula with Inline Filter Housing (.082″ tubing) for Sotax AT/AT7smart

Part No: PRBFS10-ST82
Manufacturer: Sotax
500/900mL 316 SS Cannula with Inline Filter Housing (.125″ tubing) for Sotax AT/AT7smart

500/900mL 316 SS Cannula with Inline Filter Housing (.125″ tubing) for Sotax AT/AT7smart

Part No: PRBFS10-ST
Manufacturer: Sotax
500mL Cannula Extension for Agilent/VanKel Auto-Sampling

500mL Cannula Extension for Agilent/VanKel Auto-Sampling

Part No: PROBEX-VK
Manufacturer: Agilent
500mL Dual DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for Distek Baths

500mL Dual DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for Distek Baths

Part No: CAN500-DDV
Manufacturer: Distek
500mL Dual DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for Hanson SR8-Plus Baths

500mL Dual DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for Hanson SR8-Plus Baths

Part No: CAN500-DHV
Manufacturer: Hanson
500mL Dual DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for VanKel EaseAlign Baths

500mL Dual DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for VanKel EaseAlign Baths

Part No: CAN500-DVV
Manufacturer: Agilent
500mL DV Series Sampling Probe Bottom for Distek Baths

500mL DV Series Sampling Probe Bottom for Distek Baths

Part No: CAN5BM-DV
Manufacturer: Distek
500mL DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for Distek Baths

500mL DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for Distek Baths

Part No: CAN500-DV
Manufacturer: Distek
500mL Fixed Vessel Mount 1/16″ (1.6mm) Sample Probe for Hanson Vision

500mL Fixed Vessel Mount 1/16″ (1.6mm) Sample Probe for Hanson Vision

Part No: CAN500-HR2
Manufacturer: Hanson
500mL Sample/Return Probe Fixed with Filter Housing, Stopper & Up/Down Collars for Sotax

500mL Sample/Return Probe Fixed with Filter Housing, Stopper & Up/Down Collars for Sotax

Part No: PRBFSR-5S
Manufacturer: Sotax
500mL Solid Housing Sampling Probe for Distek Baths

500mL Solid Housing Sampling Probe for Distek Baths

Part No: CAN500-DSH
Manufacturer: Distek
500mL Standard Sampling Probe Bottom for Distek Baths

500mL Standard Sampling Probe Bottom for Distek Baths

Part No: CAN5BM-DK
Manufacturer: Distek
500mL Standard Sampling Probe for Distek Baths

500mL Standard Sampling Probe for Distek Baths

Part No: CAN500-DK
Manufacturer: Distek
6.5’’ (165mm) Agilent/VanKel Auto-Sampling Cannula for 500mL Sampling

6.5’’ (165mm) Agilent/VanKel Auto-Sampling Cannula for 500mL Sampling

Part No: CAN500-60
Manufacturer: Agilent
7.75″ (195mm) Bent 316 SS 1/16″ (1.6mm) OD Cannula with Kynar Luer Lock, Low Cost alternative

7.75″ (195mm) Bent 316 SS 1/16″ (1.6mm) OD Cannula with Kynar Luer Lock, Low Cost alternative

Part No: CAN775-062L
Manufacturer: Generic
7.75″ (195mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with Kynar Luer Lock, Low Cost alternative

7.75″ (195mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with Kynar Luer Lock, Low Cost alternative

Part No: CAN775-SHL
Manufacturer: Generic
7.75″ (195mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock

7.75″ (195mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock

Part No: CAN775-SH
Manufacturer: Caleva / ERWEKA / Hanson / Pharmatest
7.75″ (195mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock & PTFE sleeve for full flow/QLA “01” style filters

7.75″ (195mm) Bent 316 SS 1/8″ (3.2mm) OD Cannula with SS Luer Lock & PTFE sleeve for full flow/QLA “01” style filters

Part No: CA8775-VK
Manufacturer: Generic
7.75″ (195mm) Bent 316 SS Cannula with Kynar Luer Lock & Tygon Tubing for full flow/QLA “01” style filters, Low Cost alternative

7.75″ (195mm) Bent 316 SS Cannula with Kynar Luer Lock & Tygon Tubing for full flow/QLA “01” style filters, Low Cost alternative

Part No: CAN775-01L
Manufacturer: Generic
7.75″ (195mm) Bent 316 SS Cannula with SS Luer Lock & Perm SS Tip for full flow/QLA “01” style filters

7.75″ (195mm) Bent 316 SS Cannula with SS Luer Lock & Perm SS Tip for full flow/QLA “01” style filters

Part No: CAN775-VK
Manufacturer: Generic
7.75″ (195mm) Bent 316 SS Cannula with SS Luer Lock & Perm SS Tip for Hanson/QLA “HR” style filters

7.75″ (195mm) Bent 316 SS Cannula with SS Luer Lock & Perm SS Tip for Hanson/QLA “HR” style filters

Part No: CAN775-HR
Manufacturer: Hanson
7.75″ (195mm) Bent 316 SS Cannula with SS Luer Lock & Tygon Tubing for full flow/QLA “01” style filters

7.75″ (195mm) Bent 316 SS Cannula with SS Luer Lock & Tygon Tubing for full flow/QLA “01” style filters

Part No: CAN775-01
Manufacturer: Agilent
7.75″ (195mm) Bent PEEK 1/8″ (3.2mm) OD Cannula with PEEK Luer Lock

7.75″ (195mm) Bent PEEK 1/8″ (3.2mm) OD Cannula with PEEK Luer Lock

Part No: CAN775-PH
Manufacturer: Caleva / ERWEKA / Hanson / Pharmatest
7.75″ (195mm) Bent PEEK 1/8″ (3.2mm) OD Cannula with PEEK Luer Lock & PTFE sleeve for full flow/QLA “01” style filters

7.75″ (195mm) Bent PEEK 1/8″ (3.2mm) OD Cannula with PEEK Luer Lock & PTFE sleeve for full flow/QLA “01” style filters

Part No: CA8775-PV
Manufacturer: Generic
750mL DV Series Sampling Probe uses QLA “01” style filters in housing for Distek Baths

750mL DV Series Sampling Probe uses QLA “01” style filters in housing for Distek Baths

Part No: CAN750-DV
Manufacturer: Distek
90 Degree Cannula Elbow

90 Degree Cannula Elbow

Part No: THD90-065
Manufacturer: Generic
900mL Dual DV Series Sampling Probe uses full flow/ QLA “01” style filters in housing for VanKel EaseAlign Baths

900mL Dual DV Series Sampling Probe uses full flow/ QLA “01” style filters in housing for VanKel EaseAlign Baths

Part No: CAN900-DVV
Manufacturer: Agilent
900mL Dual DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for Distek Baths

900mL Dual DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for Distek Baths

Part No: CAN900-DDV
Manufacturer: Distek
900mL Dual DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for Hanson SR8-Plus Baths

900mL Dual DV Series Sampling Probe uses full flow/QLA “01” style filters in housing for Hanson SR8-Plus Baths

Part No: CAN900-DHV
Manufacturer: Hanson
900mL DV Series Sampling Probe Bottom for Distek Baths

900mL DV Series Sampling Probe Bottom for Distek Baths

Part No: CAN9BM-DV
Manufacturer: Distek
900mL DV Series Sampling Probe uses full flow/ QLA “01” style filters in housing for Distek Baths

900mL DV Series Sampling Probe uses full flow/ QLA “01” style filters in housing for Distek Baths

Part No: CAN900-DV
Manufacturer: Distek
900mL Fixed Vessel Mount 1/16″ (1.6mm) Sample Probe for Hanson Vision

900mL Fixed Vessel Mount 1/16″ (1.6mm) Sample Probe for Hanson Vision

Part No: CAN900-HR2
Manufacturer: Hanson
900mL Sample/Return Probe Fixed with Filter Housing, Stopper & Up/Down Collars for Sotax

900mL Sample/Return Probe Fixed with Filter Housing, Stopper & Up/Down Collars for Sotax

Part No: PRBFSR-9S
Manufacturer: Sotax
900mL Solid Housing Sampling Probe for Distek Baths

900mL Solid Housing Sampling Probe for Distek Baths

Part No: CAN900-DSH
Manufacturer: Distek
900mL Standard Sampling Probe Bottom for Distek Baths

900mL Standard Sampling Probe Bottom for Distek Baths

Part No: CAN9BM-DK
Manufacturer: Distek
900mL Standard Sampling Probe for Distek Baths

900mL Standard Sampling Probe for Distek Baths

Part No: CAN900-DK
Manufacturer: Distek
900mL Standard Sampling Probe uses Hanson/ QLA “HR” style filters on SS probe tip

900mL Standard Sampling Probe uses Hanson/ QLA “HR” style filters on SS probe tip

Part No: CAN900-DH
Manufacturer: Hanson
Adjustable .078” (2mm) OD Cannula Stopper for Erweka DT800 series cover (12mm hole)

Adjustable .078” (2mm) OD Cannula Stopper for Erweka DT800 series cover (12mm hole)

Part No: CANSTP-EW-3
Manufacturer: ERWEKA
Adjustable 1/8” (3.2mm) OD Cannula Stopper for Erweka DT700 Series (.785″/19.9mm)

Adjustable 1/8” (3.2mm) OD Cannula Stopper for Erweka DT700 Series (.785″/19.9mm)

Part No: CANSTP-EW-1
Manufacturer: ERWEKA
Adjustable 1/8” (3.2mm) OD Cannula Stopper for Erweka DT800 series cover (12mm hole)

Adjustable 1/8” (3.2mm) OD Cannula Stopper for Erweka DT800 series cover (12mm hole)

Part No: CANSTP-EW-2
Manufacturer: ERWEKA
Adjustable 1/8″ (3.2mm) Cannula Stopper with set screw for Distek

Adjustable 1/8″ (3.2mm) Cannula Stopper with set screw for Distek

Part No: CA8STP-DK
Manufacturer: Distek
Adjustable 1/8″ (3.2mm) Cannula with PTFE Sleeve, set screw style, Stopper for Distek Cover

Adjustable 1/8″ (3.2mm) Cannula with PTFE Sleeve, set screw style, Stopper for Distek Cover

Part No: CA9STP-DV
Manufacturer: Distek
Adjustable 1/8″ (3.2mm) Cannula with PTFE Sleeve, set screw style, Stopper for VanKel EaseAlign Cover

Adjustable 1/8″ (3.2mm) Cannula with PTFE Sleeve, set screw style, Stopper for VanKel EaseAlign Cover

Part No: CA8STP-VK
Manufacturer: Agilent
Adjustable 1/8″ (3.2mm) OD Cannula Stopper for Erweka (use with CAN015-EW)

Adjustable 1/8″ (3.2mm) OD Cannula Stopper for Erweka (use with CAN015-EW)

Part No: CANSTP-EW
Manufacturer: Caleva / Erweka / Pharmatest
Adjustable 1/8″ (3.2mm) OD Cannula Stopper with set screw for Hanson

Adjustable 1/8″ (3.2mm) OD Cannula Stopper with set screw for Hanson

Part No: CANSTP-HR
Manufacturer: Hanson
Adjustable Cannula Stopper for Pharmatest, Black Delrin

Adjustable Cannula Stopper for Pharmatest, Black Delrin

Part No: CANSTP-PT4B
Manufacturer: Pharmatest
Adjustable Cannula Stopper with nut and ferrule (.082″ OD)

Adjustable Cannula Stopper with nut and ferrule (.082″ OD)

Part No: CANSTP-DVN
Manufacturer: Generic
Adjustable Cannula Stopper with set screw for Agilent 708/709-DS (.082″ OD)

Adjustable Cannula Stopper with set screw for Agilent 708/709-DS (.082″ OD)

Part No: CANSTP082-70XDS
Manufacturer: Agilent
Adjustable Cannula Stopper with set screw for Agilent 708/709-DS Series (.125″ OD)

Adjustable Cannula Stopper with set screw for Agilent 708/709-DS Series (.125″ OD)

Part No: CANSTP125-70XDS
Manufacturer: Agilent
Adjustable Cannula Stopper with set screw for Distek (.082″ OD)

Adjustable Cannula Stopper with set screw for Distek (.082″ OD)

Part No: CANSTP-DK
Manufacturer: Distek
Adjustable Cannula Stopper with set screw for Sotax (use with CAN013-ST)

Adjustable Cannula Stopper with set screw for Sotax (use with CAN013-ST)

Part No: CANSTP-ST
Manufacturer: Sotax
Adjustable Cannula Stopper with set screw for V-Series 7020/7025/7030 (thru head mount for CAN015-01/CA8015-VK cannula). Use with CAN015-01 to make Agilent# 17-3317

Adjustable Cannula Stopper with set screw for V-Series 7020/7025/7030 (thru head mount for CAN015-01/CA8015-VK cannula). Use with CAN015-01 to make Agilent# 17-3317

Part No: CANSTP-VKV
Manufacturer: Agilent
Adjustable Cannula Stopper with set screw for VanKel EaseAlign Cover (.082″ OD)

Adjustable Cannula Stopper with set screw for VanKel EaseAlign Cover (.082″ OD)

Part No: CANSTP-VK
Manufacturer: Agilent
Adjustable Manual Sampling Cannula, 1/8″ (3.2mm) OD PEEK for Hanson Vision

Adjustable Manual Sampling Cannula, 1/8″ (3.2mm) OD PEEK for Hanson Vision

Part No: MCAN2-HR
Manufacturer: Hanson
Agilent/VanKel “01” Style with Tygon Tubing Cannula Stopper for Distek Cover

Agilent/VanKel “01” Style with Tygon Tubing Cannula Stopper for Distek Cover

Part No: CANSTP-078-53
Manufacturer: Agilent & Distek
Agilent/VanKel “01” Style with Tygon Tubing Cannula Stopper for VanKel EaseAlign Cover

Agilent/VanKel “01” Style with Tygon Tubing Cannula Stopper for VanKel EaseAlign Cover

Part No: CANSTP-078-31
Manufacturer: Agilent
Agilent/VanKel 1/8″ (3.2mm) OD with PTFE Sleeve or VK Style with Perm SS Tip Cannula Stopper for Distek Cover

Agilent/VanKel 1/8″ (3.2mm) OD with PTFE Sleeve or VK Style with Perm SS Tip Cannula Stopper for Distek Cover

Part No: CANSTP-142-53
Manufacturer: Agilent & Distek
Agilent/VanKel 1/8″ (3.2mm) OD with PTFE Sleeve or VK Style with Perm SS Tip Cannula Stopper for VanKel EaseAlign Cover

Agilent/VanKel 1/8″ (3.2mm) OD with PTFE Sleeve or VK Style with Perm SS Tip Cannula Stopper for VanKel EaseAlign Cover

Part No: CANSTP-142-31
Manufacturer: Agilent
Air-Tight Locking Nut for Female Luer Fittings (Pack/10)

Air-Tight Locking Nut for Female Luer Fittings (Pack/10)

Part No: FSLLR-6
Manufacturer: Universal
Angled Probe, White Kynar Luer for Logan

Angled Probe, White Kynar Luer for Logan

Part No: 802-0121
Manufacturer: Generic
Black O-Ring for Adjustable Cannula Stoppers (Pack/12)

Black O-Ring for Adjustable Cannula Stoppers (Pack/12)

Part No: ORING-CANSTP
Manufacturer: Generic
Cannula Stopper for Hanson Vision

Cannula Stopper for Hanson Vision

Part No: STPR-HR
Manufacturer: Hanson
Combined Sample/Return Cannula with Filter Housing (thru head mount) for Sotax

Combined Sample/Return Cannula with Filter Housing (thru head mount) for Sotax

Part No: PRBFSR-ST
Manufacturer: Sotax
Combined Sample/Return Cannula without Filter Housing (thru head mount) for Sotax

Combined Sample/Return Cannula without Filter Housing (thru head mount) for Sotax

Part No: PRBNSR-ST
Manufacturer: Sotax
Custom 450mm Length Bent 316 SS Cannula

Custom 450mm Length Bent 316 SS Cannula

Part No: CAN450MM-SH
Manufacturer: Generic
Custom 450mm Length Bent PEEK Cannula

Custom 450mm Length Bent PEEK Cannula

Part No: CAN450MM-PH
Manufacturer: Generic
Distek/Hanson 1/16″ (1.6mm) OD Cannula Stopper for Distek Cover

Distek/Hanson 1/16″ (1.6mm) OD Cannula Stopper for Distek Cover

Part No: CANSTP-065-53
Manufacturer: Distek & Hanson
Distek/Hanson 1/16″ (1.6mm) OD Cannula Stopper for VanKel EaseAlign Cover

Distek/Hanson 1/16″ (1.6mm) OD Cannula Stopper for VanKel EaseAlign Cover

Part No: CANSTP-065-31
Manufacturer: Agilent & Distek
DV Series Sampling Probe Top for Distek Baths (Locking)

DV Series Sampling Probe Top for Distek Baths (Locking)

Part No: CANTOP-DV
Manufacturer: Distek
Female Luer Adapter

Female Luer Adapter

Part No: CANFLA-DK
Manufacturer: Distek
Female Luer Adapter & Elbow Assembly

Female Luer Adapter & Elbow Assembly

Part No: CANFAE-DK
Manufacturer: Distek
Fixed Vessel Mount 1/16″ (1.6mm) Sample Probe with Stopper & Nut for Hanson Vision (Small Vol, Oint Cell, APP 3)

Fixed Vessel Mount 1/16″ (1.6mm) Sample Probe with Stopper & Nut for Hanson Vision (Small Vol, Oint Cell, APP 3)

Part No: CANADJ-HR2
Manufacturer: Hanson
Hanson 1/8″ (3.2mm) OD or HR Style with Perm SS Tip Cannula Stopper for Distek Cover

Hanson 1/8″ (3.2mm) OD or HR Style with Perm SS Tip Cannula Stopper for Distek Cover

Part No: CANSTP-125-53
Manufacturer: Distek & Hanson
Hanson 1/8″ (3.2mm) OD or HR Style with Perm SS Tip Cannula Stopper for VanKel EaseAlign Cover

Hanson 1/8″ (3.2mm) OD or HR Style with Perm SS Tip Cannula Stopper for VanKel EaseAlign Cover

Part No: CANSTP-125-31
Manufacturer: Hanson
Inline Filter Housing Assembly- DV Series

Inline Filter Housing Assembly- DV Series

Part No: FILASY-DV
Manufacturer: Distek
Inline Filter Housing Assembly- Standard DK Series

Inline Filter Housing Assembly- Standard DK Series

Part No: FILASY-DK
Manufacturer: Distek
Male Luer to 1/4-28 Thread

Male Luer to 1/4-28 Thread

Part No: CANMLA-DK
Manufacturer: Generic
Male to Female Elbow

Male to Female Elbow

Part No: CANFLE-DK
Manufacturer: Distek
Red Silicone O-Ring for DK Series Probe (Pack/12)

Red Silicone O-Ring for DK Series Probe (Pack/12)

Part No: ORING-CANDK
Manufacturer: Distek
Red Silicone O-Ring for DV Series Probe (Pack/12)

Red Silicone O-Ring for DV Series Probe (Pack/12)

Part No: ORING-CANDV
Manufacturer: Distek
Resident Cannula Adapter for VK8000 auto-sampler probes and Agilent 708-DS cover

Resident Cannula Adapter for VK8000 auto-sampler probes and Agilent 708-DS cover

Part No: RCA-70XDS-VK
Manufacturer: Agilent
Resident Cannula Adapter for VK8000 auto-sampler probes and Distek cover

Resident Cannula Adapter for VK8000 auto-sampler probes and Distek cover

Part No: RCA-DK-VK
Manufacturer: Agilent
Resident Cannula Adapter for VK8000 auto-sampler probes and QLA Small Volume Assembly Cover (SMVCVR-UN)

Resident Cannula Adapter for VK8000 auto-sampler probes and QLA Small Volume Assembly Cover (SMVCVR-UN)

Part No: RCA-SMV-VK
Manufacturer: Agilent
Return Probe for Distek Baths

Return Probe for Distek Baths

Part No: CANRET-DK
Manufacturer: Distek
Standard Sampling Probe Top for Distek Baths (Push-On)

Standard Sampling Probe Top for Distek Baths (Push-On)

Part No: CANTOP-DK
Manufacturer: Distek
Straight Probe with Hub, 16 gage for Logan

Straight Probe with Hub, 16 gage for Logan

Part No: 802-0118
Manufacturer: Generic
Scroll to Top