All Intrinsic Dissolution

Intrinsic dissolution apparatus, also known as wood apparatus, is used to acquire the dissolution rate of APIs.

10.2″ (260mm) Intrinsic 10mm OD Shaft & Holder for Sotax (old style shaft), Electropolished 316 SS, Serialized

10.2″ (260mm) Intrinsic 10mm OD Shaft & Holder for Sotax (old style shaft), Electropolished 316 SS, Serialized

Part No: IDASNH-ST01
Manufacturer: Sotax
10.2″ (260mm) Intrinsic 10mm OD Shaft & Holder for Sotax, Electropolished 316 SS, Serialized

10.2″ (260mm) Intrinsic 10mm OD Shaft & Holder for Sotax, Electropolished 316 SS, Serialized

Part No: IDASNH-ST
Manufacturer: Sotax
10.3″ (262mm) Intrinsic 10mm OD Shaft & Holder for Electrolab, Electropolished 316 SS, Serialized

10.3″ (262mm) Intrinsic 10mm OD Shaft & Holder for Electrolab, Electropolished 316 SS, Serialized

Part No: IDASNH-EL
Manufacturer: Electrolab
15″ (380mm) Spin ON/OFF Intrinsic Upper Shaft with Safety Clip Groove for Hanson Vision Classic 6, 316 SS, Serialized (NOTE: This is not a standard Hanson threaded upper shaft and will not fit with Hanson lower paddles or basket shafts. Must be used with IDASNH-HRV6 and IDACLIP-HRV6 only.)

15″ (380mm) Spin ON/OFF Intrinsic Upper Shaft with Safety Clip Groove for Hanson Vision Classic 6, 316 SS, Serialized (NOTE: This is not a standard Hanson threaded upper shaft and will not fit with Hanson lower paddles or basket shafts. Must be used with IDASNH-HRV6 and IDACLIP-HRV6 only.)

Part No: IDASHT-HRV6
Manufacturer: Hanson
18″ (457mm) Intrinsic 10mm OD Shaft & Holder for Erweka, Electropolished 316 SS, Serialized

18″ (457mm) Intrinsic 10mm OD Shaft & Holder for Erweka, Electropolished 316 SS, Serialized

Part No: IDASNH-EW
Manufacturer: Erweka
18″ (457mm) Intrinsic 3/8″ (9.5mm) OD Shaft & Holder, Electropolished 316 SS, Serialized

18″ (457mm) Intrinsic 3/8″ (9.5mm) OD Shaft & Holder, Electropolished 316 SS, Serialized

Part No: IDASNH-01
Manufacturer: Generic
19.3″ (490mm) Intrinsic 10mm OD Shaft & Holder for Erweka, Electropolished 316 SS, Serialized

19.3″ (490mm) Intrinsic 10mm OD Shaft & Holder for Erweka, Electropolished 316 SS, Serialized

Part No: IDASNH-EW193
Manufacturer: ERWEKA
19.3″ (490mm) Intrinsic 10mm OD Shaft & Holder for Pharmatest, Electropolished 316 SS, Serialized

19.3″ (490mm) Intrinsic 10mm OD Shaft & Holder for Pharmatest, Electropolished 316 SS, Serialized

Part No: IDASNH-PT
Manufacturer: Pharmatest
19.48″ (495mm) Intrinsic 3/8″ (9.5mm) OD Shaft & Holder for Hanson Elite 8, Electropolished 316 SS, Serialized

19.48″ (495mm) Intrinsic 3/8″ (9.5mm) OD Shaft & Holder for Hanson Elite 8, Electropolished 316 SS, Serialized

Part No: IDASNH-HRV
Manufacturer: Hanson
21″ (535mm) Intrinsic 3/8″ (9.5mm) OD Shaft & Holder, Electropolished 316 SS, Serialized. Can be used with Distek 2500, Agilent 708-DS and VanKel with O-Ring Spindle Assembly.

21″ (535mm) Intrinsic 3/8″ (9.5mm) OD Shaft & Holder, Electropolished 316 SS, Serialized. Can be used with Distek 2500, Agilent 708-DS and VanKel with O-Ring Spindle Assembly.

Part No: IDASNH-21
Manufacturer: Generic
8.65″ (221mm) Intrinsic 10mm OD Shaft & Holder for Pharmatest, Electropolished 316 SS, Serialized

8.65″ (221mm) Intrinsic 10mm OD Shaft & Holder for Pharmatest, Electropolished 316 SS, Serialized

Part No: IDASNH-PT865
Manufacturer: Pharmatest
8mm Intrinsic Die includes Gasket (IDAGST-01), Electropolished 316 SS, Serialized

8mm Intrinsic Die includes Gasket (IDAGST-01), Electropolished 316 SS, Serialized

Part No: IDADIE-01
Manufacturer: Agilent
8mm Intrinsic Punch and Handle, Serialized

8mm Intrinsic Punch and Handle, Serialized

Part No: IDAPCH-01
Manufacturer: Agilent
Intrinsic Dissolution Apparatus Complete Set for Copley Baths includes 1 each of the following: IDASNH-COP (Spin On/Off Shaft & Holder-10mm OD) and Adapter, IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Copley Baths includes 1 each of the following: IDASNH-COP (Spin On/Off Shaft & Holder-10mm OD) and Adapter, IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-COP
Manufacturer: Copley
Intrinsic Dissolution Apparatus Complete Set for Electrolab Baths includes 1 each of the following: IDASNH-EL (10.3″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Electrolab Baths includes 1 each of the following: IDASNH-EL (10.3″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-EL
Manufacturer: Electrolab
Intrinsic Dissolution Apparatus Complete Set for Erweka Baths includes 1 each of the following: IDASNH-EW (18″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Erweka Baths includes 1 each of the following: IDASNH-EW (18″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-EW
Manufacturer: Erweka
Intrinsic Dissolution Apparatus Complete Set for Erweka Baths includes 1 each of the following: IDASNH-EW193 (19.3″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Erweka Baths includes 1 each of the following: IDASNH-EW193 (19.3″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-EW193
Manufacturer: ERWEKA
Intrinsic Dissolution Apparatus Complete Set for Hanson Vision Classic 6 Baths includes 1 each of the following: IDASHT-HRV6 (15” Upper Spin ON/OFF Shaft with Safety Clip Groove), IDACLIP-HRV6 (Safety Clip), IDASNH-HRV6 (6.875″ Spin ON/OFF Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate).

Intrinsic Dissolution Apparatus Complete Set for Hanson Vision Classic 6 Baths includes 1 each of the following: IDASHT-HRV6 (15” Upper Spin ON/OFF Shaft with Safety Clip Groove), IDACLIP-HRV6 (Safety Clip), IDASNH-HRV6 (6.875″ Spin ON/OFF Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate).

Part No: IDASET-HRV6
Manufacturer: Generic
Intrinsic Dissolution Apparatus Complete Set for Hanson Vision Elite 8 Baths includes 1 each of the following: IDASNH-HRV (19.48″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Hanson Vision Elite 8 Baths includes 1 each of the following: IDASNH-HRV (19.48″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-HRV
Manufacturer: Generic
Intrinsic Dissolution Apparatus Complete Set for Pharmatest Baths includes 1 each of the following: IDASNH-PT (19.3″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Pharmatest Baths includes 1 each of the following: IDASNH-PT (19.3″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-PT
Manufacturer: Pharmatest
Intrinsic Dissolution Apparatus Complete Set for Pharmatest Baths includes 1 each of the following: IDASNH-PT865 (8.65″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Pharmatest Baths includes 1 each of the following: IDASNH-PT865 (8.65″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-PT865
Manufacturer: Pharmatest
Intrinsic Dissolution Apparatus Complete Set for Sotax Baths includes 1 each of the following: IDASNH-ST (10.2″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Sotax Baths includes 1 each of the following: IDASNH-ST (10.2″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-ST
Manufacturer: Sotax
Intrinsic Dissolution Apparatus Complete Set for Sotax Baths includes 1 each of the following: IDASNH-ST01 (xx” Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Sotax Baths includes 1 each of the following: IDASNH-ST01 (xx” Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-ST01
Manufacturer: Sotax
Intrinsic Dissolution Apparatus Complete Set includes 1 each of the following: IDASNH-01 (18″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set includes 1 each of the following: IDASNH-01 (18″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-01
Manufacturer: Generic
Intrinsic Dissolution Apparatus Complete Set includes 1 each of the following: IDASNH-21 (21″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate). Can be used with Distek 2500, Agilent 708-DS and VanKel with O-Ring Spindle Assembly.

Intrinsic Dissolution Apparatus Complete Set includes 1 each of the following: IDASNH-21 (21″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate). Can be used with Distek 2500, Agilent 708-DS and VanKel with O-Ring Spindle Assembly.

Part No: IDASET-21
Manufacturer: Generic
Intrinsic Gasket for IDADIE-01

Intrinsic Gasket for IDADIE-01

Part No: IDAGST-01
Manufacturer: Agilent
Intrinsic Surface Plate with Screws, Serialized

Intrinsic Surface Plate with Screws, Serialized

Part No: IDAPLT-01
Manufacturer: Agilent
Safety Clip for IDASHT-HRV6 for Hanson Vision Classic 6, Delrin and 316 SS

Safety Clip for IDASHT-HRV6 for Hanson Vision Classic 6, Delrin and 316 SS

Part No: IDACLIP-HRV6
Manufacturer: Hanson
Spin ON/OFF Intrinsic Holder Set for Hanson Vision Classic 6 Baths includes 1 each of the following: IDASHT-HRV6 (15” Upper Spin ON/OFF Shaft with Safety Clip Groove), IDACLIP-HRV6 (Safety Clip) and IDASNH-HRV6 (6.875″ Spin ON/OFF Shaft & Holder)

Spin ON/OFF Intrinsic Holder Set for Hanson Vision Classic 6 Baths includes 1 each of the following: IDASHT-HRV6 (15” Upper Spin ON/OFF Shaft with Safety Clip Groove), IDACLIP-HRV6 (Safety Clip) and IDASNH-HRV6 (6.875″ Spin ON/OFF Shaft & Holder)

Part No: IDASNHSET-HRV6
Manufacturer: Hanson
Spin On/Off Intrinsic Holder with 10mm OD adapter for Copley, Electropolished 316 SS, Serialized

Spin On/Off Intrinsic Holder with 10mm OD adapter for Copley, Electropolished 316 SS, Serialized

Part No: IDASNH-COP
Manufacturer: Copley
Spin ON/OFF Intrinsic Shaft & Holder for Hanson Vision Classic 6, Electropolished 316 SS, Serialized. Length 6.875″ (174.6mm)

Spin ON/OFF Intrinsic Shaft & Holder for Hanson Vision Classic 6, Electropolished 316 SS, Serialized. Length 6.875″ (174.6mm)

Part No: IDASNH-HRV6
Manufacturer: Hanson
Scroll to Top