Intrinsic Dissolution - Total Laboratory Services - ERWEKA UK Distributor

10.2″ (260mm) Intrinsic 10mm OD Shaft & Holder for Sotax (old style shaft), Electropolished 316 SS, Serialized

Part No: IDASNH-ST01

Manufacturer: Sotax

10.2″ (260mm) Intrinsic 10mm OD Shaft & Holder for Sotax, Electropolished 316 SS, Serialized

Part No: IDASNH-ST

Manufacturer: Sotax

10.3″ (262mm) Intrinsic 10mm OD Shaft & Holder for Electrolab, Electropolished 316 SS, Serialized

Part No: IDASNH-EL

Manufacturer: Electrolab

15″ (380mm) Spin ON/OFF Intrinsic Upper Shaft with Safety Clip Groove for Hanson Vision Classic 6, 316 SS, Serialized (NOTE: This is not a standard Hanson threaded upper shaft and will not fit with Hanson lower paddles or basket shafts. Must be used with IDASNH-HRV6 and IDACLIP-HRV6 only.)

Part No: IDASHT-HRV6

Manufacturer: Hanson

18″ (457mm) Intrinsic 10mm OD Shaft & Holder for Erweka, Electropolished 316 SS, Serialized

Part No: IDASNH-EW

Manufacturer: Erweka

18″ (457mm) Intrinsic 3/8″ (9.5mm) OD Shaft & Holder, Electropolished 316 SS, Serialized

Part No: IDASNH-01

Manufacturer: Generic

19.3″ (490mm) Intrinsic 10mm OD Shaft & Holder for Erweka, Electropolished 316 SS, Serialized

Part No: IDASNH-EW193

Manufacturer: ERWEKA

19.3″ (490mm) Intrinsic 10mm OD Shaft & Holder for Pharmatest, Electropolished 316 SS, Serialized

Part No: IDASNH-PT

Manufacturer: Pharmatest

19.48″ (495mm) Intrinsic 3/8″ (9.5mm) OD Shaft & Holder for Hanson Elite 8, Electropolished 316 SS, Serialized

Part No: IDASNH-HRV

Manufacturer: Hanson

21″ (535mm) Intrinsic 3/8″ (9.5mm) OD Shaft & Holder, Electropolished 316 SS, Serialized. Can be used with Distek 2500, Agilent 708-DS and VanKel with O-Ring Spindle Assembly.

Part No: IDASNH-21

Manufacturer: Generic

8.65″ (221mm) Intrinsic 10mm OD Shaft & Holder for Pharmatest, Electropolished 316 SS, Serialized

Part No: IDASNH-PT865

Manufacturer: Pharmatest

8mm Intrinsic Die includes Gasket (IDAGST-01), Electropolished 316 SS, Serialized

Part No: IDADIE-01

Manufacturer: Agilent

8mm Intrinsic Punch and Handle, Serialized

Part No: IDAPCH-01

Manufacturer: Agilent

Intrinsic Dissolution Apparatus Complete Set for Copley Baths includes 1 each of the following: IDASNH-COP (Spin On/Off Shaft & Holder-10mm OD) and Adapter, IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-COP

Manufacturer: Copley

Intrinsic Dissolution Apparatus Complete Set for Electrolab Baths includes 1 each of the following: IDASNH-EL (10.3″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-EL

Manufacturer: Electrolab

Intrinsic Dissolution Apparatus Complete Set for Erweka Baths includes 1 each of the following: IDASNH-EW (18″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-EW

Manufacturer: Erweka

Intrinsic Dissolution Apparatus Complete Set for Erweka Baths includes 1 each of the following: IDASNH-EW193 (19.3″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-EW193

Manufacturer: ERWEKA

Intrinsic Dissolution Apparatus Complete Set for Hanson Vision Classic 6 Baths includes 1 each of the following: IDASHT-HRV6 (15” Upper Spin ON/OFF Shaft with Safety Clip Groove), IDACLIP-HRV6 (Safety Clip), IDASNH-HRV6 (6.875″ Spin ON/OFF Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate).

Part No: IDASET-HRV6

Manufacturer: Generic

Intrinsic Dissolution Apparatus Complete Set for Hanson Vision Elite 8 Baths includes 1 each of the following: IDASNH-HRV (19.48″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-HRV

Manufacturer: Generic

Intrinsic Dissolution Apparatus Complete Set for Pharmatest Baths includes 1 each of the following: IDASNH-PT (19.3″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-PT

Manufacturer: Pharmatest

Intrinsic Dissolution Apparatus Complete Set for Pharmatest Baths includes 1 each of the following: IDASNH-PT865 (8.65″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-PT865

Manufacturer: Pharmatest

Intrinsic Dissolution Apparatus Complete Set for Sotax Baths includes 1 each of the following: IDASNH-ST (10.2″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-ST

Manufacturer: Sotax

Intrinsic Dissolution Apparatus Complete Set for Sotax Baths includes 1 each of the following: IDASNH-ST01 (xx” Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-ST01

Manufacturer: Sotax

Intrinsic Dissolution Apparatus Complete Set includes 1 each of the following: IDASNH-01 (18″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Part No: IDASET-01

Manufacturer: Generic

Intrinsic Dissolution Apparatus Complete Set includes 1 each of the following: IDASNH-21 (21″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate). Can be used with Distek 2500, Agilent 708-DS and VanKel with O-Ring Spindle Assembly.

Part No: IDASET-21

Manufacturer: Generic

Spin ON/OFF Intrinsic Holder Set for Hanson Vision Classic 6 Baths includes 1 each of the following: IDASHT-HRV6 (15” Upper Spin ON/OFF Shaft with Safety Clip Groove), IDACLIP-HRV6 (Safety Clip) and IDASNH-HRV6 (6.875″ Spin ON/OFF Shaft & Holder)

Part No: IDASNHSET-HRV6

Manufacturer: Hanson

Spin On/Off Intrinsic Holder with 10mm OD adapter for Copley, Electropolished 316 SS, Serialized

Part No: IDASNH-COP

Manufacturer: Copley

Spin ON/OFF Intrinsic Shaft & Holder for Hanson Vision Classic 6, Electropolished 316 SS, Serialized. Length 6.875″ (174.6mm)

Part No: IDASNH-HRV6

Manufacturer: Hanson

Categories

Part Search

Manufacturer Filter

Reset Manufacturer

10.2″ (260mm) Intrinsic 10mm OD Shaft & Holder for Sotax (old style shaft), Electropolished 316 SS, Serialized

10.2″ (260mm) Intrinsic 10mm OD Shaft & Holder for Sotax, Electropolished 316 SS, Serialized

10.3″ (262mm) Intrinsic 10mm OD Shaft & Holder for Electrolab, Electropolished 316 SS, Serialized

15″ (380mm) Spin ON/OFF Intrinsic Upper Shaft with Safety Clip Groove for Hanson Vision Classic 6, 316 SS, Serialized (NOTE: This is not a standard Hanson threaded upper shaft and will not fit with Hanson lower paddles or basket shafts. Must be used with IDASNH-HRV6 and IDACLIP-HRV6 only.)

18″ (457mm) Intrinsic 10mm OD Shaft & Holder for Erweka, Electropolished 316 SS, Serialized

18″ (457mm) Intrinsic 3/8″ (9.5mm) OD Shaft & Holder, Electropolished 316 SS, Serialized

19.3″ (490mm) Intrinsic 10mm OD Shaft & Holder for Erweka, Electropolished 316 SS, Serialized

19.3″ (490mm) Intrinsic 10mm OD Shaft & Holder for Pharmatest, Electropolished 316 SS, Serialized

19.48″ (495mm) Intrinsic 3/8″ (9.5mm) OD Shaft & Holder for Hanson Elite 8, Electropolished 316 SS, Serialized

21″ (535mm) Intrinsic 3/8″ (9.5mm) OD Shaft & Holder, Electropolished 316 SS, Serialized. Can be used with Distek 2500, Agilent 708-DS and VanKel with O-Ring Spindle Assembly.

8.65″ (221mm) Intrinsic 10mm OD Shaft & Holder for Pharmatest, Electropolished 316 SS, Serialized

8mm Intrinsic Die includes Gasket (IDAGST-01), Electropolished 316 SS, Serialized

8mm Intrinsic Punch and Handle, Serialized

Intrinsic Dissolution Apparatus Complete Set for Copley Baths includes 1 each of the following: IDASNH-COP (Spin On/Off Shaft & Holder-10mm OD) and Adapter, IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Electrolab Baths includes 1 each of the following: IDASNH-EL (10.3″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Erweka Baths includes 1 each of the following: IDASNH-EW (18″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Erweka Baths includes 1 each of the following: IDASNH-EW193 (19.3″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Hanson Vision Elite 8 Baths includes 1 each of the following: IDASNH-HRV (19.48″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Pharmatest Baths includes 1 each of the following: IDASNH-PT (19.3″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Pharmatest Baths includes 1 each of the following: IDASNH-PT865 (8.65″ Shaft & Holder-10mm OD), IDAPCH-01 (8 mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Sotax Baths includes 1 each of the following: IDASNH-ST (10.2″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set for Sotax Baths includes 1 each of the following: IDASNH-ST01 (xx” Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set includes 1 each of the following: IDASNH-01 (18″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate)

Intrinsic Dissolution Apparatus Complete Set includes 1 each of the following: IDASNH-21 (21″ Shaft & Holder), IDAPCH-01 (8mm Punch), IDADIE-01 (8mm Die), IDAGST-01 (Gasket), IDAPLT-01 (Surface Plate). Can be used with Distek 2500, Agilent 708-DS and VanKel with O-Ring Spindle Assembly.

Intrinsic Gasket for IDADIE-01

Intrinsic Surface Plate with Screws, Serialized

Safety Clip for IDASHT-HRV6 for Hanson Vision Classic 6, Delrin and 316 SS

Spin ON/OFF Intrinsic Holder Set for Hanson Vision Classic 6 Baths includes 1 each of the following: IDASHT-HRV6 (15” Upper Spin ON/OFF Shaft with Safety Clip Groove), IDACLIP-HRV6 (Safety Clip) and IDASNH-HRV6 (6.875″ Spin ON/OFF Shaft & Holder)

Spin On/Off Intrinsic Holder with 10mm OD adapter for Copley, Electropolished 316 SS, Serialized

Spin ON/OFF Intrinsic Shaft & Holder for Hanson Vision Classic 6, Electropolished 316 SS, Serialized. Length 6.875″ (174.6mm)